New 20ft Standard Shipping Container
Rated 4.75 out of 5 based on 4 customer ratings
(4 customer reviews) $1,726.97
A new one-trip 20ft container. It has made a single voyage from the factory, so the steel, paint and floor are close to new. 1,169 cu ft inside (19’4″ long, 7’8″ wide, 7’10” high), Corten steel walls, a hardwood floor and cargo doors at one end. Wind and watertight.
- Condition
- New one-trip
- Delivery
- From $225.00, a fixed rate for your region, shown at checkout. No mileage charges.
- Delivery time
- 8 to 15 business days after your order is confirmed
Delivery is a fixed rate per container for your region, shown in the cart before you pay. It is the full delivery price to any address in that region, with no mileage charges. Ask a specialist
SKU: NYC-N20ST-29395 Category: 20ft containers
Specifications
| Container Size | 20ft |
|---|---|
| External Length | 20' |
| External Width | 8' |
| External Height | 8'6" |
| Internal Length | 19'4" |
| Internal Width | 7'8" |
| Internal Height | 7'10" |
| Floor Area | 148 sq ft (13.8 m²) |
| Cubic Capacity | 1,169 cu ft (33.1 m³) |
| Tare Weight | 4,850 lbs (2,200 kg) |
| Max Payload | 62,150 lbs (28,200 kg) |
| Max Gross Weight | 67,200 lbs (30,480 kg) |
| Lashing Rings | 8 forged steel lashing rings (4 floor, 4 ceiling) |
| Door Configuration | Standard — double cargo doors at rear end only |
| Material | Corten Steel (A606/A588) |
| Floor | Hardwood Apitong/Keruing — 1.1" thick |
| ISO Standard | ISO 668 Series 1 — 20ft intermodal freight container |
| Stackability | Up to 9 units high (loaded) |
| Wind Water | WWT guaranteed |
Nominal figures. Each unit's CSC plate shows its exact tare and payload.
Reviews (4)
4 reviews for New 20ft Standard Shipping Container
Add a review Cancel reply






















Oliver Simpson –
Converting into a workshop. Wanted no existing rust to deal with. Clean interior — no residual odor, no debris. One-trip condition is immediately obvious in person.
Sharon Henry –
Wanted factory seals, factory floor, zero prior history. Everything checked out. Driver placed it exactly where I asked. The container has done exactly what we needed it to.
Norma Hughes –
Factory floor was intact — no marks, no soft spots. One locking bar needed adjustment before it seated properly. Fixed it in 10 minutes. Didn’t affect security. Factory floor and seals are a noticeable step above any used container.
Curtis Shaw –
Running a growing inventory operation. New made sense at this scale. Tilt-bed process was quicker than I expected.